Description
A single EasyCare Quick Stud Application Tool (studs available seperately).
Electric drill required for application (not supplied).
This Applicator Tool can fit in a drill that takes a 1/4" drill bit, or our Universal Manual Handle 1/4" which can be purchased separately HERE.
Easy to use when adding new Quick Studs to your hoof boots in slippery conditions. This applicator will only work with the Easycare quick studs which are available to purchase here.
Full instructions for using the applicator can be found in the EasyCare Quick Studs packet.
Things to keep in mind when using studs...
- Make sure your boots fit well and your horse is acclimated to wearing them before you apply studs
- Always apply studs to both boots for proper balance
- Do not turn horses out wearing studded boots, as a horse could injure themselves and others with studded boots.
- When drilling, make sure the stud does not extend past the sole of the foot. This can especially be a problem on older boots with worn soles as it can cause pressure points on the inside of the boot.
- Use caution when installing studs in used boots, as the sole tread is thinner than when new. Studs may penetrate through older well-worn soles.
- Always use your best judgment when going out for a ride in slippery conditions. Hoof boots provide extra traction, but they do have their limits.
