CLICK HERE TO READ MORE ABOUT FIT KITS AND HOW THEY WORK!
- Up to 3 boot shells for you to hire to help determine the correct size Scoot Boot Hoof boots.
- Avoids having to send boots back and forth, saving time and money.
- The Scoot Boot sizing can seem quite generous and so the fitting shells can be useful to determine correct sizing.
- Takes some of the guesswork out of fitting.
- Simple to use.
- Sizes 0 Slim - 7 Slim available.
Regular sizes available separately in the Scoot Boot Fit Kit
The Scoot Boot SLIM Fit Kit has been designed to help you find the correct pair of SLIM Scoot Boots for your horse. The Scoot Boots are easy to use, due their simplicity and ease of fit.
HOW TO USE YOUR FIT KIT
To try on your Scoot Boot Fit Kit, pick up the hoof with the sole facing upwards in the trimming/picking out position and slip the toe of the hoof into the boot. Pull the rear of the boot over the bulbs (you may need to use a slight twisting motion), make sure it is centered, and place the hoof onto the ground.
- The hoof should slip comfortably into the boot, without having to use too much effort.
- The fit should be snug - not tight or loose.
With the hoof on the ground:
- You should be able to fit a finger under each heel arch/heel strap of the boot and the heel bulb. If you cannot do this, the boot is too small. At no time should the strap be placing pressure on the bulbs.
- The heel bulbs should protrude through the gaps at the rear of the boot.
- If you push the front of the boot together (as though front straps have been secured) the gap at the front should ideally be between 10mm-15mm. (After riding in an actual boot, you will find that the boot will mould to the hoof and the gap will reduce in width. An ideal gap at the front of your Fit Kit shell is approx 10mm.)
- Ideally, the top of the boot (that sits around the hoof, below the coronary band) should fit snug against the hoof wall. There should be no gap between the boot and the upper hoof wall below the coronary band. Some gaps in a Fit Kit shell may close up once the front straps are fitted.
Now pick up the hoof and do the “wiggle test” - gently try to twist the shell clockwise and anti clockwise (don’t force the boot). Your boot should not turn on the hoof - ideally you want the shell and hoof to move together. A little bit of movement side-to-side with your Fit Kit shell can still be fine (as you don’t yet have the front straps secured) but you don’t want more than a few degrees each way, and you don’t want the central vertical shank to pass over the bulbs.
There are lots of helpful photos and comments showing how the Scoot Boot should fit HERE.
Terms of Fit Kit Hire and Fit Kit Hire Fees
The price charged is a deposit on the Fit Kit only and will be refunded less a small fit kit fee. Please post the Fit Kit back to us within 10 days of receipt (clean and dry with no parts missing, dirty or broken). This period can be extended, but please contact us first. Occasionally, we may send a shell that is dirty or damaged and there is no need to notify us if the shell was dirty or damaged when you received it.
If you return the Fit Kit to us and wish to PURCHASE or HIRE a pair of Hoof Boots at the time of return, you will be refunded the deposit paid LESS the applicable fit kit fee.
If you decide to return the Fit Kit and NOT order or hire any boots at the time of return, you will be refunded the deposit paid LESS the applicable fit kit fee AND a further admin fee of £10. You will not be charged a further £10 admin fee if you opt for Store Credit.
If you decide to NOT order a pair of boots at the time of return of the Fit Kit and opt for a refund, but you later come back to Hoof Bootique to purchase a pair of hoof boots, then please feel free to ask for a discount of £10, representing the additional admin fee of £10 you were charged on the Fit Kit.
If the Fit Kit is returned to us with parts missing, broken or dirty (subject to the comments above) the amount refunded to you will be LESS the cost of putting the Fit Kit right again.
Please note you will be responsible for returning the Fit Kit to us at your cost, and we are not able to refund you until the Fit Kit is received by us so we do recommend a recorded method of postage.
If you would like to use our Royal Mail Returns Service, please visit the Returns Policy page of our website in order to print a Royal Mail Returns Label:
(Please note, this service is free at the point of posting but a charge of £4.95 will be deducted from any refund or charged separately if no refund due).
Standard Fit Kit Fees
*Any fit kit other than a mixed fit kit is standard.
A £15 fee will be retained for the 1st Fit Kit hired.
If more than one Fit Kit was hired at the same time (so under the same Order Number) then a reduced fee of £10 will be retained for each subsequent Fit Kit.
The remaining balance will either be refunded or rolled over onto a boot purchase, as required.
You can view the size chart for the Scoot Boot here.