Please note: this is an old style of Scoot Boot pads with a thinner honeycombed texture, and we only have limited stock available. These will wear through faster than the newer style pads, but will generally wear through around the hoof wall, so they will still support the inner structures. As we only have limited sizes, you could purchase some of the size 9 pads and trim them to fit a smaller size.
If you wish to purchase the newer style pads, you can do so here:
Available in one pair of two pairs.
Scoot Boot Pads are for sensitive soles or to assist fitting in between sizes.
*If used with Scoot Slims you will need to cut the pads to shape.
The pads are sized as per the boot sizes and so are available in 11 different sizes. They are already shaped to fit inside the boots and so no cutting required!
For maximum security, Scoot Boots recommend you glue your Scoot pads into your Scoot Boots. This will extend the life of the pads and keep them in place. You can purchase a good plastic glue from your local hardware store worldwide and we recommend a human shoe glue, as it should flex with the pads. We don't recommend you use any make of Super Glue as this will not flex with the pads and will crack.
We only recommend you use pads if necessary. Most horses do not need pads in Scoot Boots. Using pads may affect the fit of the boots and you may need to go up a size to accommodate pads.
Scoot Pads to fit sizes 000-2: 3mm thickness
Scoot Pads to fit sizes 3-8: 4mm thickness